Height adjustable metal table legs and rolling table legs. These systems have many applications. Such as home office, office, healthcare, hotels, schools, and residential.
See Illustrations and Prices below.
All measurements are in millimeters. Click Measurements to view the conversion chart.
Select the desired style from the drop-down above. Then click Order to go to your shopping cart and specify a quantity.
Steel Table Legs w/Levelers
Height adjustable table legs for computer tables or desks, etc. With steel triangular mounting plates. These legs are very strong. They will bear a load of 220lbs. (100 kg) per leg. Available in two heights 28" and 34 1/2". Adjustment range +25mm. Sold in sets of 4, and includes all mounting hardware. Plate mounts under table. Legs slide over mounting plate. Insert screws and tighten with included hex key. Heights listed include mounting plate and leveler. With adjustable foot, +25mm.
Finish: Legs: Steel, plated or epoxy coated. Leveler: Black plastic. Mounting Plate: Black steel.
Height adjustable table legs for computer tables or desks, etc. Steel square mounting plate with M10 bolt. Leg simply screws into mounting plate. They will bear a load of 220lbs. (100 kg) per leg. Adjustment range +25mm. Sold in sets of 4, and includes all mounting hardware. Heights listed include mounting plate and leveler. With adjustable foot, +25mm.
Finish: Legs: Steel, plated or epoxy coated. Leveler: Black plastic. Mounting Plate: Black steel.
This system has many applications. Such as office, healthcare, hotels, schools, and residential.
A leg system where levelers and castors can be adjusted to accomodate uneven floors. No sudden drops back to the low position.
Legs are sold in sets of 4pcs. Levelers, spacers, and castors are sold seperately.
Meets or exceeds ANSI/BIFMA requirements.
Each leg must be adjusted separately.
Legs are marked with a scale to keep track of height level.
Leveler plus spacer equals the same height as casters (77mm). One set includes 4 legs.
For use on legs above: 635.01.372 - 635.01.271. Also for use on legs below: 635.60.280 - 635.60.980
Height 67mm, + 10mm of leveler. Total height = 77mm. Finish: Black Plastic
635.01.003 - $3.00
Caster w/Brake
For use on legs above: 635.01.372 - 635.01.271. Also for use on legs below: 635.60.280 - 635.60.980
60mm caster with brake.
Height 77mm. Finish: Black Plastic
635.01.004 - $6.00
Table Legs - Caster/Leveling System
A leg system where levelers and casters can be adjusted to accomodate uneven floors
Use 2 legs with levelers and 2 legs with casters for a table which can be "wheel burrowed"
Legs are sold in sets of 4. Levelers, spacers, and castors are sold seperately as pieces.
Casters have 1/2" leveling adjustment. E-leg 60mm, with threaded insert. Accepts levelers, spacers, castors, shown below. Legs are sold as a set (4 pieces). Please order levelers, spacers, and casters individually.
Finish: Legs: Steel or epoxy coated. Mounting Plated: Steel. Insert: Black plastic.
A flexible leg system offering "do it yourself" customization. Cut 60mm tubes to the height you need. Various accessories are available. Height adjustable table legs for computer desks, tables, conference desks. Sold as single piece.
For legs above: 635.20.066 635.20.266 635.20.366 635.20.368 635.20.966 Screw mounted, with M10 stud. Includes mounting Screws # 9 x 1". Sold by set set. (4 pieces)
Finish: Steel epoxy coated, black.
635.06.013
- $12.00
Thread Insert
For Legs above:
635.20.066 635.20.266 635.20.366 635.20.368 635.20.966 For mounting plate and caster attachment. Is pressed into top or bottom of tube. Please note, caster selected must have a threaded stem at least 7/8" long. Sold by 1 piece
Finish: Zinc, unfinished, black plastic.
635.06.026
- $3.12
Levelor Foot, Press Fit
For legs above: 635.20.066 635.20.266 635.20.366 635.20.368 635.20.966 When completely screwed down (compressed) Height is 5/8". Offers + 1" of adjustment. Sold by set (4 pieces)
Finish: Black plastic.
635.06.008
- $6.00
Height Adjuster (Levelor)
For legs above: 635.20.066 635.20.266 635.20.366 635.20.368 635.20.966 Deluxe model. Offers 4 3/8" of adjustment. When completely screwed down (compressed) Height is 1 3/8". When fully extended height is 5 3/4". Includes black sleeve to cover adjustment mechanism. Sold by 1 piece
Finish: Levelor: Orange plastic Sleeve: Black plastic.
654.35.310
- $9.60
Decorative Sleeve
For legs above: 635.20.066 635.20.266 635.20.366 635.20.368 635.20.966 Slides over 60mm legs to add decorative accent. Sold by 1 piece
Finish: Levelor: Orange plastic Sleeve: Black plastic.
654.35.370
- $3.60
Washer
Required when legs are used with castors other than specified. M10 male washer required.
Finish: Steel, black.
635.16.399
- $1.20
Table Legs, Castor Systems
Height adjustable table legs. Use for computer tables, office desks, home office desk and conference tables.
Load capacity 220 pounds (100 Kg) per leg.
Includes mounting plate and leveler.
E-leg 60mm for 80mm castors. Comes with M10 threaded plate for castors. Accepts the 80mm castors shown below. Sold in sets (4 pieces). Includes 4 legs, 4 mounting plates, hex key, and screws. Mounting directions included.
For legs above:
635.60.260
635.60.360
635.60.362
635.60.460 635.60.960 635.60.270
635.60.370
635.60.372
635.60.470 635.60.970 Unique locking mechanism secures wheel in both rotation and swivel. Rubberized surface on wheel insures a quiet and smooth operation. M10 thread. Load capacity: 220 (100kg) per castor. Sold in sets (4 pieces)
Finish: Steel, plastic body, black rubberized wheel.
661.29.300 - Black w/pierced wheel - $60.00
661.29.305 - Black w/solid black wheel - $57.60
661.29.310 - Black w/chrome wheel - $57.60
661.29.910 - Silver w/silver wheel - $72.00
Twin Wheel Casters
For legs above:
635.60.260
635.60.360
635.60.362
635.60.460 635.60.960 635.60.270
635.60.370
635.60.372
635.60.470 635.60.970
Screws directly into threaded plate. Washers included. Comes with M10 threads. Load capacity 88lbs. (40kg) per caster. Sold in sets (4 casters and 4 - 60mm washers)
Finish: Nylon, black matt, galvanized steel.
660.04.455
- With Brake - $6.00 660.05.455
- Without Brake - $7.20
Tapered Table legs
Sleek and smooth metal tapered table legs.
Legs start with a 2 3/8" (60mm) diameter at the top and taper down to 1 1/4" (32mm) at the bottom. Adjustment range +20mm. Height 28" (710mm) Diameter 2 3/8" ( 60mm). Made of heavy duty tubular steel.
Ball joint foot adjusts for uneven floors. Use for computer tables, office desks, home office desk and conference tables.
Sold in sets. (4 pieces)
Screw mounts to underside of table.
Finish: Legs: Tubular steel. Leveler: Plastic, black Mounting Plated: Steel.
635.41.271 - Chrome Polished - $156.00 635.41.371 - Nickel Matt - $120.00 635.41.671
- Black Matt Epoxy - $155.15
Tapered Table legs
Sleek and smooth metal tapered table legs.
Legs start with a 1 1/2" (38mm) diameter at the top and taper down t0 3/4" (19mm) at the bottom. Adjustment range +10mm. Height 28" (710mm) Diameter 1 1/2" ( 38mm). Made of heavy duty tubular steel.
Adjusts for uneven floors. Use for computer tables, office desks, home office desk and conference tables.
Sold in sets. (4 pieces)
Screw mounts to underside of table.
Finish: Legs: Tubular steel. Leveler: Plastic, black Mounting Plated: Steel.
Sleek and smooth metal tapered table legs.
With steel trianglar mounting plates, E legs are very strong. Load bearing 220 lbs. (100kg) per leg. Adjustment range +10mm. Leg tapers from 60mm to 25mm. Legs start with a 2 3/8" (60mm) diameter at the top and taper down to 1" (25mm) at the bottom. With adjustable foot, +10mm. Made of heavy duty tubular steel.
Adjusts for uneven floors. Use for computer tables, office desks, home office desk and conference tables.
Sold in sets. (4 pieces) Includes all mounting hardware.
Screw mounts to underside of table.
Finish: Legs: Tubular steel. Leveler: Plastic, black Mounting Plated: Steel.
Use for computer tables, office desks, home office desk and conference tables.
These legs taper from 2 3/8" (32mm) at the top to 1 1/4" (32mm) at the bottom. Comes with adjustable foot. Screw mounts to underside of table. Welded on mounting plate. Adjustable range: +20mm.
Ball joint foot adjusts for uneven floors. Sold in sets. (4 pieces). Height: 28" (710mm). Diameter: 2 3/8" (60mm).
635.42.671 - Nickel Matt - $180.00 635.42.371 - Black Matt Epoxy - $120.00
Tapered and Flared Aluminum Table legs
Use for computer tables, office desks, home office desk and conference tables.
These legs taper from 3" (75mm) at the top to 1 1/8" (28mm) at the bottom. Screw mounts to underside of table. Adjustable range: +15mm.
Sold in sets. (2 pieces). Height: 28" (710mm). Diameter: 3" (75mm).
Finish: Leg: Aluminum. Adjustment Foot: Black plastic. Mounting Plate: Aluminum.
